TM 9-2320-366-34-4
NOTE
Use bolts P/N 12414307-141 and self-locking
nuts P/N 12414308-025 on step (48).
(48) Position two bolts (60) and self-locking nuts (61) in rear
lower crossmember support (43).
(49) Tighten two self-locking nuts (45 and 61) to 196-240 lb-ft
(265-325 N·m).
(50) Tighten six self-locking nuts (54) to 76-94 lb-ft (103-125
N·m).
(51) Tighten four bolts (49) and two bolts (51) to 236-288 lb-ft
(319-389 N·m).
(52) Tighten two self-locking nuts (14) on L-brackets (12).
NOTE
Left and right clamps are installed the same
way. Right side shown.
(53) Install clamp (11) on L-bracket (12) with screw (10) and
self-locking nut (9).
(54) Perform step (53) on left side clamp.
End of Task.
Change 1
18-61
