TM 9-2320-366-34-4
18-5. M1085 PINTLE HOOK EXTENSION KIT INITIAL INSTALLATION (CONT)
WARNING
Pintle
hook
extension
weighs
approximately 90 lbs (41 kgs). Attach a
suitable lifting device prior to installation.
Failure to comply may result in injury to
personnel or damage to equipment.
NOTE
• Step (45) requires the aid of two assistants.
• Use bolts P/N 12414307-142 and self-locking
nuts P/N 12414308-025 on step (45).
(45) Position pintle hook extension (39) on rear crossmember
(5) with four bolts (58) and self-locking nuts (59).
NOTE
• Use bolts P/N 12414307-143 and self-locking
nuts P/N 12414308-025 on step (46).
• Steps (46) through (57) require the aid of an
assistant.
(46) Position two bolts (40) and self-locking nuts (41) in pintle
hook extension (39).
(47) Tighten four self-locking nuts (59) and two self-locking
nuts (41) to 196-240 lb-ft (265-325 N·m).
18-60
Change 1
