TM 9-2320-366-34-4
18-6. 200 AMP ALTERNATOR REPAIR
This task covers:
a. Disassembly
b. Assembly
INITIAL SETUP
Tools and Special Tools
Tool Kit, Genl Mech (Item 78, Appendix B)
Wrench, Torque 0-175 lb-ft (Item 92, Appendix B)
Puller Kit, Universal (TM 9-2320-366-20)
Wrench, Torque 0-200 lb-in. (Item 93, Appendix B)
Hammer, Soft Head (Item 33, Appendix B)
Press, Arbor Hand Operated (Item 48, Appendix B)
Vise, Machinist (Item 82, Appendix B)
Wrench Set, Socket (Item 85, Appendix B)
Materials/Parts
Screw, Cap, Hex (3) (Item 78, Appendix C)
Nut, Self-locking (Item 54, Appendix C)
Pulley, Groove (Item 59, Appendix C)
Grease, Molybdenum Disulfide (Item 37, Appendix C)
Dispenser, Pressure Sensitive Adhesive Tape (Item
30, Appendix C)
Sealing Compound (Item 71, Appendix C)
Sealing Compound (Item 76, Appendix C)
Materials/Parts (Cont)
Nut, Self-locking (Item 186, Appendix F)
Key, Woodruff (Item 92, Appendix F)
Nut, Self-locking (Item 197, Appendix F)
Lockwasher (8) (Item 149, Appendix F)
Nut, Self-locking (Item 188, Appendix F)
Lockwasher (Item 137, Appendix F)
Nut, Self-locking (13) (Item 189, Appendix F)
Lockwasher (2) (Item 153, Appendix F)
Lockwasher (Item 148, Appendix F)
Nut, Self-locking (18) (Item 185, Appendix F)
Nut, Self-locking (12) (item 184, Appendix F)
Bushing, Sleeve (Item 27, Appendix F)
Ring, Retaining (Item 360, Appendix F)
Ring, Retaining (Item 359, Appendix F)
Lockwasher (2) (Item 150, Appendix F)
Personnel Required
(2)
a. Disassembly
(1) Remove self-locking nut (1) and washer (2) from shaft
(3). Discard self-locking nut.
(2) Remove key (4) from shaft (3). Discard key.
(3) Remove pulley bushing (5) from shaft (3).
(4) Remove self-locking nut (6), washer (7), and fan (8) from
shaft (3). Discard self-locking nut.
18-62
Change 1
