TM 9-2320-366-34-2
13-47. V-ROD CONTROL ARM REPLACEMENT (CONT)
(12) Position bracket (7) on V-rod control arm (3) with two U-
bolts (8), four spacers (9), washers (10) and nuts (11).
(13) Tighten four nuts (11) to 14-18 lb-ft (20-24 N·m).
c. Rear Removal.
CAUTION
Do not remove more than one V-rod control arm
at a time.
Failure to comply may result in
damage to equipment.
NOTE
Note position of U-bolts and brackets prior to
removal.
(1) Remove four nuts (1), washers (2), spacers (3), two U-
bolts (4) and bracket (5) from V-rod control arm.
(2) Position bracket (5) to allow access.
13-420
Change 1
