TM 9-2320-366-34-2
13-47. V-ROD CONTROL ARM REPLACEMENT (CONT)
(8) Match mark V-rod control arm (6) and support (8).
(9) Position V-rod control arm (6) in vise.
(10) Remove self-locking nut (11) and support (8) from V-rod
control arm (6). Discard self-locking nut.
(11) Remove two bolts (9) from support (8).
b. Installation.
(1) Position two bolts (1) in support (2).
(2) With matchmarks aligned, position support (2) on V-rod
control arm (3) with self-locking nut (4).
(3) Tighten self-locking nut (4) to 590-736 lb-ft (800-1000
N·m).
(4) Remove V-rod control arm (3) from vise.
13-418
Change 1
