TM 9-2320-366-34-3
16-24. M1084/M1086 CROSS RELIEF VALVE REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Batteries disconnected (TM 9-2320-366-20-3).
Tools and Special Tools
Tool Kit, Genl Mech (Item 78, Appendix B)
Goggles, Industrial (Item 28, Appendix B)
Pan, Drain (Item 43, Appendix B)
Wrench, Torque, 0-175 lb-ft (Item 92, Appendix B)
Materials/Parts
Cap and Plug Set (Item 17, Appendix C)
Lockwasher (4) (Item 139, Appendix F)
Materials/Parts (Cont)
Packing, Preformed (3) (Item 262, Appendix F)
Packing, Preformed (3) (Item 236, Appendix F)
Packing, Preformed (2) (Item 263, Appendix F)
Sealing, Compound (Item 76, Appendix C)
Dispenser, Pressure Sensitive Adhesive Tape
(Item 30, Appendix C)
Personnel Required
(2)
a. Removal.
WARNING
Wear appropriate eye protection when
working under vehicle due to the
possibility of falling debris. Failure to
comply may result in injury to personnel.
(1) Position drain pan under cross relief valve (1).
WARNING
Cap or plug hydraulic hoses and fittings to
prevent contamination of hydraulic system.
Failure to comply may result in damage to
equipment.
NOTE
Tag hydraulic hoses and connection points
prior to disconnecting.
(2) Disconnect two hoses (2) from 90-degree fittings (3).
(3) Disconnect hose (4) from fitting (5).
16-124
