TM 9-2320-366-34-3
16-26. M1084/M1086 OUTRIGGER JACK CYLINDER REPLACEMENT (CONT)
CAUTION
Cap or plug hydraulic openings to prevent
contamination of hydraulic system. Failure to
comply may result in damage to equipment.
NOTE
Tag hydraulic hoses and connection points prior
to disconnecting.
(5) Disconnect two hoses (8) from adapters (9).
(6) Remove two adapters (9) from jack cylinder (7).
(7) Removed two preformed packings (10) from adapters
(9). Discard preformed packings.
(8) Raise jack cylinder (7) enough to take weight off pin
(11).
(9) Remove two cotter pins (12) from pin (11). Discard
cotter pins.
(10) Remove pin (11) from jack cylinder (7).
(11) Raise jack cylinder (7) up approximately six inches.
(12) Install pin (11) in jack cylinder (7).
(13) Install two cotter pins (13) in pin (11).
16-130
