TM 9-2320-366-34-4
(4) Disconnect wiring harness (7) from control valve (8) and
output speed sensor (9).
(5) Remove six screws (10) and control valve (8) from
transfer case cover (3).
(6) Remove two screws (11) and output speed sensor (9)
from transfer case cover (3).
(7) Remove five screws (12), idler gear cover (13), and
gasket (14) from transfer case cover (3).
Discard
gasket.
(8) Remove seal washer (15) from idler gear cover (13).
Discard seal washer.
(9) Remove eight bolts (16) and rear output bearing retainer
(17) from transfer case cover (3).
(10) Remove eight bolts (18), manifold (19), pressure relief
ball (20), and shim(s) (21) from transfer case housing
(22).
(11) Remove five bolts (23), idler gear cover (24), seal
washer (25), shim(s) (26), and gasket (27) from transfer
case housing (22). Discard gasket and seal washer.
22-11
