TM 9-2320-366-34-4
22-4. TRANSFER CASE HOUSING REPAIR (CONT)
NOTE
Transmission shaft adapter may have stayed
with transmission.
(9) Inspect transmission shaft adapter (8) for cracks, spline
wear, and burring.
(10) Inspect four plugs (9) for corrosion, pitting, and stripped
threads.
(11) Inspect oil pump (10) for cracks, burring, nicks, and
scratches.
(12) Inspect pressure relief valve (11) for damage, scratches,
and wear.
(13) Inspect spring (12) for worn or broken coils.
(14) Inspect gear (13) for burring, nicks, scratches, and
broken gear teeth.
(15) Inspect shims (14, 15 and 16) for cracks, nicks, and
burring.
c. Assembly.
NOTE
Lubricate all parts with lubricating oil during
assembly.
(1) Install two dowels (1) in transfer case housing (2).
(2) Install two preformed packings (3) on plugs (4).
(3) Install two plugs (4) in transfer case housing (2).
(4) Install orifice plug (5) and plug (6) in transfer case
housing (2).
22-16
