TM 9-2320-366-34-4
22-3. TRANSFER CASE MODULE REPAIR
This task covers:
a. Disassembly
b. Assembly
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Transfer case module removed (para 22-2).
Tools and Special Tools
Tool Kit, Genl Mech (Item 78, Appendix B)
Holding Bar, Pinion (TM 9-2320-366-20)
Wrench, Impact, Electric (Item 88, Appendix B)
Socket Set, Impact (Item 58, Appendix B)
Wrench, Torque, 0-175 lb-ft (Item 92, Appendix B)
Wrench, Torque, 0-600 lb ft (Item 97, Appendix B)
Wrench Set, Socket (Item 84, Appendix B)
Adapter, Socket Wrench (Item 2, Appendix B)
Tools and Special Tools (Cont)
Puller Kit, Universal (Item 51, Appendix B)
Socket, Socket Wrench (TM 9-2320-366-20)
Materials/Parts
Gasket (2) (Item 69, Appendix F)
Gasket (Item 62, Appendix F)
Oil, Lubricating (Item 45, Appendix C)
Personnel Required
(2)
a. Disassembly.
(1) Position transfer case module (1) with C6 clutch housing
(2) facing up.
(2) Remove 15 screws (3), two screws (4), C6 clutch
housing (2), and gasket (5) from transfer case module
(1). Discard gasket.
(3) Remove nut (6), washer (7), and yoke (8) from rear
output shaft (9).
22-6
Change 1
