TM 9-2320-366-34-4
(10) Install washer (17) and yoke (18) on rear output shaft
(19) with nut (20).
(11) Tighten nut (20) to 450-600 lb-ft (610-814 N·m).
(12) Position gasket (21) and C6 clutch housing (22) on
transfer case module (2) with 15 screws (23) and two
screws (24).
(13) Tighten 15 screws (23) and two screws (24) to 44-55 lb-
ft (60-75 N·m).
c. Follow-On Maintenance.
Install transfer case module (para 22-2).
End of Task.
Change 1
22-9