TM 9-2320-366-34-4
(4) Remove nine screws (10) and six screws (11) from rear
output housing (12).
NOTE
Step (5) requires the aid of an assistant.
(5) Remove rear output housing (12) and gasket (13) from
transfer case module (1). Discard gasket.
(6) Remove P4 planetary carrier (14) from transfer case
module (1).
(7) Remove sun gear (15) from P4 planetary carrier (14).
(8) Position transfer case module (1) with front output
housing (16) facing up.
(9) Remove nut (17), washer (18), and yoke (19) from
output shaft (20).
(10) Remove 15 screws (21) from front output housing (16).
NOTE
Step (11) requires the aid of an assistant.
(11) Remove front output housing (16) and gasket (22) from
transfer case module (1). Discard gasket.
(12) Remove C7 clutch housing (23) from transfer case
module (1).
Change 1
22-7
