TM 9-2320-366-34-3
16-59. M1089 EIGHT-BANK VALVE ASSEMBLY REPLACEMENT/REPAIR (CONT)
(69) Install seal (95) on head valve push button (96).
(70) Install performed packing (97) on head valve (98).
(71) Install head valve coil (99), head valve push button (96),
and head valve (98) in solenoid (94).
(72) Install performed packing (100) on valve body coil (101).
(73) Install valve body push button (102) and valve body coil
(101) in solenoid (94).
(74) Position access cover (103) on solenoid (94) with four
screws (104).
(75) Perform steps (68) through (74) on remaining seven
solenoids.
NOTE
All pilot valves are assembled the same way.
One pilot valve shown.
(76) Install spool (105) in pilot valve body (106).
(77) Install two preformed packings (107) in solenoids (94).
WARNING
Adhesive Sealant MIL-S-46163 can damage
your eyes.
Wear safety goggles/glasses
when using; avoid contact with eyes.
If
sealant contacts eyes, flush eyes with water
and get immediate medical attention. Failure
to comply may result in injury to personnel.
(78) Apply sealing compound to threads of eight screws (104).
(79) Install two solenoids (94) on pilot valve body (106) with
eight screws (104).
16-332
