TM 9-2320-366-34-3
16-60. M1089 TWO WAY SOLENOID VALVE REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-366-10-1).
Batteries disconnected (TM 9-2320-366-20-3).
Hydraulic reservoir supply valve and return valve
closed (TM 9-2320-366-10-2).
Tools and Special Tools
Tool Kit, Genl Mech (Item 78, Appendix B)
Pan, Drain (Item 43, Appendix B)
Materials/Parts
Cap and Plug Set (Item 17, Appendix C)
Lockwasher (2) (Item 138, Appendix F)
Packing, Preformed (2) (Item 231, Appendix F)
Packing, Preformed (2) (Item 237, Appendix F)
Dispenser, Pressure Sensitive Adhesive Tape (Item
30, Appendix C)
Sealing Compound (Item 75, Appendix C)
a. Removal.
(1) Disconnect electrical connector (1) from two way
solenoid valve (2).
(2) Place drain pan under two way solenoid valve (2).
CAUTION
Cap or plug hydraulic connections and
connection points to prevent contamination of
hydraulic system. Failure to comply may result
in damage to equipment.
NOTE
Tag hydraulic tubes and connection points
prior to disconnecting.
(3) Disconnect hydraulic tubes (3 and 4) from two way
solenoid valve (2).
16-336
