TM 9-2320-366-34-3(2) Install rivet eyebolt (4) in pivot shaft (3).WARNINGAdhesive Sealant MIL-S-46163 can damageyour eyes. Wear safety goggles when using;avoid contact with eyes. Failure to complymay result in injury to personnel. If sealantcontacts eyes, flush eyes with water and getimmediate medical attention. Failure tocomply may result in serious injury or deathto personnel.(3) Apply sealing compound to threads of screw (5).(4) Position bushing (6), washer (7), and screw (5) in riveteyebolt (4).(5) Tighten screw (5) to 240-260 lb-ft (325-353 N·m).(6) Install lift cylinder (1) in turntable (8) with pivot shaft (9).(7) Install rivet eyebolt (10) in pivot shaft (9).(8) Apply sealing compound to threads of screw (11).(9) Position bushing (12), washer (13), and screw (11) inrivet eyebolt (10).(10) Tighten screw (11) to 240-260 lb-ft (325-353 N·m).(11) Install two preformed packings (14) on plugs (15).(12) Install two plugs (15) in counterbalance valve (16).16-213
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
