TM 9-2320-366-34-3
16-36. M1089 BOOM BASE SECTION REPLACEMENT (CONT)
(10) Remove screw (10), washer (11), and bushing (12) from
rivet eyebolt (13).
(11) Remove rivet eyebolt (13) from pivot shaft (14).
WARNING
Lift cylinder must be supported to remove
pivot shaft. Failure to comply may result
in serious injury or death to personnel or
damage to equipment.
(12) Remove pivot shaft (14) from RH lift cylinder (15).
(13) Position RH lift cylinder (15) against tool box (7).
(14) Remove screw (16), washer (17), and bushing (18) from
rivet eyebolt (19).
(15) Remove rivet eyebolt (19) from pivot shaft (20).
(16) Remove pivot shaft (20) from LH lift cylinder (21).
(17) Position LH lift cylinder (21) against tool box (7).
(18) Remove boom base section (22) from boom rest.
16-204
