TM 9-2320-366-34-3
c. Installation.
(1) Install two preformed packings (1) and preformed
packings (2) on fittings (3).
(2) Install two fittings (3) in telescopic cylinder (4).
WARNING
Adhesive sealant MIL-S-46163 can damage
your eyes. Wear safety goggles/glasses
when using; avoid contact with eyes. If
sealant contacts eyes, flush eyes with
water
and
get
immediate
medical
attention.
(3) Apply sealing compound to threads of two screws (5).
(4) Install two wear pads (6) and screws (5) on top of boom
mid section (7).
(5) Apply grease to wear pads (6) and bottom edges of
boom mid section (7).
(6) Apply sealing compound to both wear pad mounting
locations in outer end of boom base section (8).
(7) Apply sealing compound to contact side of two body
wear pads (9).
(8) Install two body wear pads (9) in outer end of boom
base section (8).
(9) Apply grease to body wear pads (9).
16-199
