TM 9-2320-366-34-3
WARNING
Remove pivot shaft far enough to release
tension link cylinder. Failure to comply may
result in injury to personnel or damage to
equipment.
NOTE
Steps (4) through (18) require the aid of an
assistant.
(4) Remove pivot shaft (5) from RH tension link cylinder (6).
(5) Position RH tension link cylinder (6) against tool box (7).
WARNING
Remove pivot shaft far enough to release
mast. Failure to comply may result in injury
to personnel or damage to equipment.
(6) Remove pivot shaft (5) from mast (8).
(7) Position mast (8) against tool box (7).
(8) Remove pivot shaft (5) from LH tension link cylinder (9).
(9) Position LH tension link cylinder (9) against tool box (7).
16-203
