TM 9-2320-366-34-3
16-29. M1084/M1086 TWO WAY SOLENOID VALVE REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Batteries disconnected (TM 9-2320-366-20-3).
Tools and Special Tools
Tool Kit, Genl Mech (Item 78, Appendix B)
Pan, Drain (Item 43, Appendix B)
Materials/Parts
Cap and Plug Set (Item 17, Appendix C)
Packing, Preformed (2) (Item 264, Appendix F)
Packing, Preformed (2) (Item 269, Appendix F)
Dispenser, Pressure Sensitive Adhesive Tape (Item
30, Appendix C)
a. Removal.
NOTE
Tag electrical connectors and connection
points prior to disconnecting.
(1) Disconnect electrical connector (1) from two way
solenoid valve (2).
(2) Place drain pan under two way solenoid valve (2).
CAUTION
Cap or plug hydraulic connections to prevent
contamination of hydraulic system. Failure to
comply may result in damage to equipment.
NOTE
Tag hydraulic tubes and connection points
prior to disconnecting.
(3) Disconnect hydraulic tube (3) from two way solenoid
valve (2).
(4) Remove two way solenoid valve (2) from hydraulic tube
(4).
16-165
