TM 9-2320-366-34-3
16-30. M1084/M1086 MANUAL OVERRIDE VALVE REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-366-10-1).
Batteries disconnected (TM 9-2320-366-20-3).
Tools and Special Tools
Tool Kit, Genl Mech (Item 78, Appendix B)
Pan, Drain (Item 43, Appendix B)
Materials/Parts
Cap and Plug Set (Item 17, Appendix C)
Lockwasher (2) (Item 139, Appendix F)
Packing, Preformed (2) (Item 231, Appendix F)
Packing, Preformed (2) (Item 237, Appendix F)
Dispenser, Pressure Sensitive Adhesive Tape (Item
30, Appendix C)
a. Removal.
CAUTION
Cap or plug hydraulic connections prior to
disconnecting to prevent contamination of
hydraulic system. Failure to comply may result
in damage to equipment.
NOTE
Tag electrical connections and connection points
prior to disconnecting.
(1) Disconnect connector (1) from manual override valve (2).
NOTE
Tag hydraulic connections and connection
points prior to disconnecting.
(2) Position drain pan under manual override valve (2).
(3) Disconnect tube (3) from fitting (4).
(4) Disconnect hose (5) from 90-degree fitting (6).
16-167
