TM 9-2320-366-34-3
(5) Remove three nuts (10) and two valve bodies (8) from
inlet body (4).
(6) Remove six preformed packings (11) from inlet body (4).
Discard preformed packings.
NOTE
All valve bodies are disassembled the same
way. Mast Control valve body shown.
(7) Remove two fittings (12) from valve body (8).
(8) Remove two preformed packings (13) from valve body
(8). Discard preformed packings.
(9) Remove lever (14) from pinion seal (15).
(10) Remove knob (16) and nut (17) from lever (14).
(11) Remove dust cap (18) and sealing washer (19) from
setscrew (20). Discard sealing washer and dust cap.
NOTE
Count the number of threads on setscrew
and record for assembly.
(12) Remove nut (21) and sealing washer (22) from setscrew
(20). Discard sealing washer.
(13) Remove setscrew (20) from lever cap (23).
16-135
