TM 9-2320-366-34-3
16-27. M1084/M1086 THREE WAY CONTROL VALVE ASSEMBLY
REPLACEMENT/REPAIR
This task covers:
a. Removal
b. Disassembly
c. Cleaning/Inspection
d. Assembly
e. Installation
f. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-366-10-1).
Batteries disconnected (TM 9-2320-366-20-3).
Tools and Special Tools
Tool Kit, Genl Mech (Item 78, Appendix B)
Wrench, Torque, 0-175 lb-ft (Item 92, Appendix
B)
Wrench, Torque, 0-200 lb-in. (Item 93, Appendix
B)
Goggles, Industrial (Item 28, Appendix B)
Gloves, Rubber (Item 26, Appendix B)
Wrench Set, Socket (Item 85, Appendix B)
Pan, Drain (Item 43, Appendix B)
Materials/Parts
Cap and Plug Set (Item 17, Appendix C)
Solvent, Dry Cleaning (Item 83, Appendix C)
Rag, Wiping (Item 60, Appendix C)
Materials/Parts (Cont)
Oil, Lubricating (Item 45, Appendix C)
Adhesive (Item 7, Appendix C)
Sealing Compound (Item 76, Appendix C)
Cap, Protective, Dust (3) (Item 30, Appendix F)
Kit, Seal (Item 108, Appendix F)
Kit, Seal (Item 120, Appendix F)
Packing, Preformed (Item 224.3, Appendix F)
Lockwasher (4) (Item 140, Appendix F)
Dispenser, Pressure Sensitive Adhesive Tape (Item
29, Appendix C)
Kit, Seal (Item 107, Appendix F)
Packing, Preformed (Item 224.4, Appendix F)
Personnel Required
(2)
a. Removal.
CAUTION
Cap or plug hydraulic connections to prevent
contamination of hydraulic system. Failure to
comply may result in damage to equipment.
NOTE
Tag hydraulic tubes and connection points
prior to disconnecting.
(1) Disconnect hydraulic tube (1) from fitting (2).
Change 1
16-133
