TM 9-2320-366-34-3(4) Install two preformed packings (7) on plugs (8).(5) Install two plugs (8) in inlet body (6).(6) Install preformed packing (9) on fitting (10).(7) Install fitting (10) in inlet body (6).(8) Install two preformed packings (11) on fittings (12).(9) Install two fittings (12) in inlet body (6).NOTE· Lubricate all parts with lubricating oil duringassembly.· All valve bodies are assembled the sameway. Mast control valve body shown.(10) Install spool (13) in valve body (14).WARNINGAdhesive sealant MIL-S-46163 can damageyour eyes. Wear safety goggles/glasseswhen using; avoid contact with eyes. Ifsealant contacts eyes, flush eyes with waterand get immediate medical attention. Failureto comply may result in injury to personnel.(11) Apply sealing compound to threads of four screws (15).(12) Install preformed packing (16), end cap (17), and fourscrews (15) on valve body (14) with matchmarks aligned.16-139
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
