TM 9-2320-366-34-3
16-22. M1084/M1086 OVERLOAD SHUTDOWN REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-366-10-1).
Batteries disconnected (TM 9-2320-366-20-3).
Tools and Special Tools
Tool Kit, Genl Mech (Item 78, Appendix B)
Materials/Parts
Lockwasher (3) (Item 139, Appendix F)
Lockwasher (2) (Item 144, Appendix F)
Dispenser, Pressure Sensitive Adhesive Tape (Item
30, Appendix C)
Personnel Required
(2)
NOTE
Use serial number of MHC when ordering
replacement overload shutdown.
a. Removal.
CAUTION
Overload shutdown cable is on a tension reel.
Allow cable to rewind slowly. Failure to comply
may result in damage to equipment.
(1) Disconnect cable eye (1) from bolt (2).
NOTE
Tag connectors and connection points prior
to disconnecting.
(2) Disconnect three connectors (3) from overload shutdown
(4).
NOTE
Step (3) requires the aid of an assistant.
(3) Remove two bolts (5), lockwashers (6), washers (7), and
clipnuts (8) from boom assembly (9). Discard
lockwashers.
16-107
