TM 9-2320-366-34-3
(19) Install carrier (12) in ring gear (6).
(20) Install carrier (18) in ring gear (6).
(21) Install sun gear (25) in carrier (18).
(22) Install bearing (26) in RH drum end (27).
(23) Install seal (28) in RH drum end (27).
(24) Install preformed packing (29) on RH drum end (27).
(25) Install two plugs (30) in RH drum end (27).
WARNING
Adhesive sealant MIL-S-46163 can damage
your eyes.
Wear safety goggles/glasses
when using; avoid contact with eyes.
If
sealant contacts eyes, flush eyes with water
and get immediate medical attention. Failure
to comply may result in injury to personnel.
(26) Apply sealing compound to threads of six bolts (31).
(27) Position RH drum end (27) on ring gear (6) with six
washers (32) and screws (31).
(28) Tighten screws (31) to 63-69 lb-ft (85-94 N m).
16-105
