TM 9-2320-366-34-3
c. Assembly.
(1) Install bearing (1) in LH drum end (2).
(2) Install seal (3) in LH drum end (2).
(3) Install preformed packing (4) on LH drum end (2).
WARNING
Adhesive sealant MIL-S-46163 can damage
your eyes. Wear safety goggles/glasses
when using; avoid contact with eyes. If
sealant contacts eyes, flush eyes with
water
and
get
immediate
medical
attention. Failure to comply may result in
injury to personnel.
(4) Apply sealing compound to threads of eight screws (5).
(5) Position LH drum end (2) on ring gear (6) with eight
washers (7) and screws (5).
(6) Tighten screws (5) to 168-192 lb-in. (19-22 N·m).
16-103
