TM 9-2320-366-34-3
WARNING
• Swing drive assembly weighs approximately
70 lbs (32 kgs). Attach a suitable lifting
device prior to removal. Failure to comply
may result in injury to personnel or damage
to equipment.
• Wear appropriate eye protection when
working under vehicle due to the possibility
of falling debris.
Failure to comply may
result in injury to personnel.
CAUTION
Use caution when lowering swing drive
assembly past cables and hoses. Failure to
comply may result in damage to equipment.
(3) Remove nine screws (4), washers (5) and swing drive
assembly (3) from crane assembly (6).
(4) Remove two screws (1) and swing drive assembly
bracket from swing drive assembly (3).
(5) Install plate (2) on swing drive assembly (3) with two
screws (1).
(6) Remove oil fill pipe (7) from swing drive assembly (3).
16-111
