TM 9-2320-366-34-3
WARNING
Use care when removing retaining rings.
Retaining rings are under tension and can
act as projectiles when released. Failure to
comply may result in injury to personnel.
NOTE
All three gears are disassembled the same way.
One gear shown.
(12) Remove retaining ring (16), pin (17), two washers (18),
gear (19), and roller set (20) from carrier (14).
(13) Perform step (12) on two remaining gears (19).
(14) Remove retaining ring (21) from drive gear (22).
(15) Remove drive gear (22) from carrier (14).
(16) Remove retaining ring (23) from drive gear (22).
NOTE
All three gears are disassembled the same
way. One gear shown.
(17) Remove retaining ring (24) from pin (25).
(18) Remove pin (25), two washers (26), and gear (27) from
carrier (15).
(19) Remove two roller sets (28) and separator (29) from
gear (27).
(20) Perform steps (17) through (19) on two remaining gears
(27).
(21) Remove washer (30) from carrier (15).
16-101
