TM 9-2320-366-34-3
16-16. M1084/M1086 TENSION LOAD CELL REPLACEMENT (CONT)
WARNING
Do not remove swivel nut on back side of
tension load cell at this time. Failure to
comply may result in injury to personnel
or damage to equipment.
(11) Loosen rear swivel nut (21) until flush with rear end of
tension load cell (20).
WARNING
Hoist assembly weighs approximately 210
lbs (95 kgs). Attach suitable lifting device
prior to installation. Failure to comply may
result in injury to personnel or damage to
equipment.
NOTE
Steps (12) and (13) require the aid of an
assistant.
(12) Lift up on hoist assembly (22).
(13) Remove front swivel nut (23) from front of tension load
cell (20).
(14) Remove hoist assembly (22) from tension load cell (20).
16-82
