TM 9-2320-366-34-3
(4) Remove two screws (8), washers (9), and bracket (10)
from hoist assembly (11).
(5) Remove two screws (12), lockwashers (13), washers
(14), and plate (15) from bracket (10).
Discard
lockwashers.
(6) Remove nut (16) and proximity sensor (17) from plate
(15).
b. Installation.
(1) Remove nut (1) from proximity sensor (2).
(2) Install proximity sensor (2) in plate (3) with nut (1).
(3) Install plate (3) on bracket (4) with two washers (5),
washers (6), and screws (7).
16-77
