TM 9-2320-366-34-3
CAUTION
Cap or plug hydraulic connections to prevent
contamination of hydraulic system. Failure to
comply may result in damage to equipment.
NOTE
Tag hydraulic hoses and connection points
prior to disconnecting.
(3) Disconnect hydraulic hose (4) from check valve (5).
(4) Remove preformed packing (6) from check valve (5).
Discard preformed packing.
(5) Disconnect two hydraulic hoses (7) from fittings (8).
(6) Remove two preformed packings (9) from fittings (8).
Discard preformed packings.
(7) Remove nut (10), lockwasher (11), washer (12), clamp
(13), and tension load cell cable (14) from boom stud
(15). Discard lockwasher.
(8) Remove clamp (13) from tension load cell cable (14).
(9) Remove screw (16) and stop block (17) from boom
brace (18).
(10) Remove jam nut (19) from tension load cell (20).
16-81
