TM 9-2320-366-34-3
16-14. M1084/M1086 CABLE FOLLOWER REPLACEMENT/REPAIR (CONT)
c. Assembly.
(1) Install two control levers (1) and manual levers (2) on
spacers (3) with two screws (4) and nuts (5).
(2) Install two posts (6) on manual levers (2) with two
washers (7) and screws (8).
(3) Install bearing (9) in roller (10).
(4) Position two washers (11), washers (12), and roller (10)
in control levers (1) with shaft (13).
(5) Install two bearings (14) in rollers (15).
(6) Install two washers (16), rollers (15), washers (17), and
washers (18) on shaft (13) with screws (19).
16-74
