TM 9-2320-366-34-3
(7) Install two springs (20) on posts (6).
d. Installation.
WARNING
Adhesive Sealant MIL-S-46163 can damage
your eyes.
Wear safety goggles/glasses
when using; avoid contact with eyes.
If
sealant contacts eyes, flush eyes with water
and get immediate medical attention. Failure
to comply may result in injury to personnel.
(1) Apply sealing compound to threads of two screws (1).
(2) Install cable follower assembly (2) on hoist assembly (3)
with four washers (4) and two screws (1).
WARNING
Use care when installing springs. Springs
are under tension and can act as
projectiles when released.
Failure to
comply may result in injury to personnel.
(3) Attach springs (5) to hoist assembly (3).
e. Follow-On Maintenance.
(1) Install hoist assembly (para 16-13).
(2) Operate MHC and check for proper operation (TM 9-
2320-366-10-1).
End of Task.
16-75
