TM 9-2320-366-34-3
(16) Install upper pivot shaft (17) through LH lift cylinder (16)
and boom assembly (1).
(17) Install rivet eyebolt (18) in pivot shaft (17).
WARNING
Adhesive sealant MIL-S-46163 can damage
your eyes. Wear safety goggles/glasses
when using; avoid contact with eyes. If
sealant contacts eyes, flush eyes with
water
and
get
immediate
medical
attention. Failure to comply may result in
injury to personnel.
(18) Apply sealing compound to threads of screws (19).
(19) Position bushing (20), washer (21), and screw (19) in
rivet eyebolt (18).
(20) Tighten screw (19) to 190-210 lb-ft (258-285 N·m).
(21) Connect four hydraulic hoses (22) to fittings (23).
16-17
