TM 9-2320-366-34-3
(4) Install tension link cylinder (5) in boom assembly (1) with
pivot shaft (3).
(5) Install rivet eyebolt (6) in pivot shaft (3).
WARNING
Adhesive sealant MIL-S-46163 can damage
your eyes.
Wear safety goggles/glasses
when using; avoid contact with eyes.
If
sealant contacts eyes, flush eyes with water
and get immediate medical attention. Failure
to comply may result in injury to personnel.
(6) Apply sealing compound to threads of screw (7).
(7) Position bushing (8), washer (9), and screw (7) in rivet
eyebolt (6).
(8) Tighten screw (7) to 190-210 lb-ft (258-285 N·m).
(9) Raise RH lift cylinder (10) in position with boom
assembly (1).
16-15
