TM 9-2320-366-34-3
15-12. M1089 TOOL BOX SUPPORT STRUCTURE REPLACEMENT (CONT)
b. Installation.
CAUTION
When installing cushions, top cushion must
be installed with metal side up and bottom
cushion must be installed with metal side
down.
Failure to comply may result in
damage to equipment.
(1) Position cushion (1) and right side mount (2) on support
structure (3) with two screws (4), cushion (5), four
washers (6), two lockwashers (7), and self-locking nuts
(8).
(2) Tighten two self-locking nuts (8) until cushions (1 and 5)
begin to bulge.
(3) Position cushion (9) and left rear mount (10) on support
structure (3) with two screws (11), cushion (12), four
washers (13), two lockwashers (14), and self-locking
nuts (15).
(4) Tighten two self-locking nuts (15) until cushions (9 and
12) begin to bulge.
(5) Position cushion (16) and left front mount (17) on
support structure (3) with two screws (18), cushion (19),
four washers (20), two lockwashers (21), and self-locking
nuts (22).
(6) Tighten two self-locking nuts (22) until cushions (16 and
19) begin to bulge.
15-152
