TM 9-2320-366-34-3
15-12. M1089 TOOL BOX SUPPORT STRUCTURE REPLACEMENT (CONT)
(3) Disconnect two hydraulic hoses (7) from adapters (2).
(4) Pull two hydraulic hoses (7) clear of support structure
(6).
(5) Remove two nuts (8) and adapters (2) from support
structure (6).
NOTE
• Remove plastic cable ties as required.
• Left and right side support structure removed
the same. Left side shown.
(6) Remove connector cover (9) from remote control cable
connector (10).
(7) Remove nut (11), screw (12), connector cover (9), and
two lanyards (13) from support structure (6).
(8) Remove four nuts (14), screws (15), and remote control
cable connector (10) from support structure (6).
(9) Pull remote control cable connector (10) clear of support
structure (6).
(10) Remove self-locking nut (16), two washers (17), bolt (18),
spring (19), and bracket (20) from support structure (6).
Discard self-locking nut.
15-148
