TM 9-2320-366-34-3
(19) Position bracket (37) on support structure (3) with spring
(38), bolt (39), two washers (40), and self-locking nut
(41).
(20) Tighten self-locking nut (41) to 76-84 lb-ft (103-114 N·m).
(21) Install remote control cable connector (42) on support
structure (3) with four screws (43) and nuts (44).
(22) Install connector cover (45) on remote control cable
connector (42).
(23) Install two lanyards (46) on support structure (3) with
screw (47) and nut (48).
(24) Perform steps (15) through (23) on right side of support
structure.
NOTE
Perform steps (25) through (28) on left side
of support structure.
(25) Install two adapters (49) on support structure (3) with two
nuts (50).
(26) Connect two hydraulic hoses (51) to adapters (49).
15-155
