TM 9-2320-366-34-3
15-12. M1089 TOOL BOX SUPPORT STRUCTURE REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-366-10-1).
Rear side marker lights removed (TM 9-2320-366-
20-3).
Back-up lights removed (TM 9-2320-
366-20-3).
Stoplights and brackets removed (TM 9-2320-366-
20-3).
Worklights removed (TM 9-2320-366-20-3).
Tool boxes and decks removed (TM 9-2320-366-20-
4).
Tools and Special Tools
Tool Kit, Genl Mech (Item 78, Appendix B)
Wrench, Torque, 0-175 lb-ft (Item 92, Appendix B)
Pan, Drain (Item 43, Appendix B)
Sling, Cargo (Item 56, Appendix B)
Tools and Special Tools (Cont)
Wrench, Torque, 0-600 lb-ft (Item 97, Appendix B)
Wrench Set, Socket (Item 84, Appendix B)
Materials/Parts
Cap and Plug Set (Item 17, Appendix C)
Dispenser, Pressure Sensitive Adhesive Tape
(Item 30, Appendix C)
Lubricating Oil, Engine (Item 46, Appendix C)
Tape, Anti-seizing (Item 84, Appendix C)
Ties, Cable Plastic (Item 92, Appendix C)
Nut, Self-Locking (6) (Item 211, Appendix F)
Nut, Self-Locking (6) (Item 180, Appendix F)
Washer, Lock (6) (Item 142, Appendix F)
Nut, Self-locking (2) (Item 196, Appendix F)
Rope, Fibrous (2) (25 ft long) (Item 62, Appendix
C)
Personnel Required
(3)
a. Removal.
CAUTION
Cap or plug hydraulic hoses to prevent
contamination of hydraulic system. Failure to
comply may result in damage to equipment.
NOTE
• Tag hoses, cables, and connection points prior
to disconnecting.
• Perform steps (1) through (5) on left side of
support structure.
(1) Remove two plugs (1) from adapters (2).
(2) Remove nut (3), screw (4), lanyard (5) and two plugs (1)
from support structure (6).
15-147
