TM 9-2320-366-34-3
15-11. M1090/M1094 DUMP BODY CAB PROTECTOR REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-366-10-1).
Cab protector raised (TM 9-2320-366-10-1).
Tools and Special Tools
Tool Kit, Genl Mech (Item 78, Appendix B)
Hammer, Hand (Item 31, Appendix B)
Pivot Pin Removal Tool, Dump Body Cab Protector
(Item 7, Appendix D)
Tools and Special Tools (Cont)
Sling, Cargo (Item 56, Appendix B)
Material/Parts
Rope, Fibrous (2) (25 ft long) (Item 62, Appendix
C)
Personnel Required
(3)
a. Removal.
(1) Tie guide ropes to each side of cab protector (1).
(2) Remove two spring pins (2) from pivot shaft (3).
WARNING
Cab protector weighs approximately 185
lbs (84 kgs).
Attach a suitable lifting
device prior to removal. Failure to comply
may result in injury to personnel or
damage to equipment.
(3) Remove pivot shaft (3) from right side of cab protector
(1).
NOTE
Step (4) requires the aid of two assistants.
(4) Remove cab protector (1) from dump body (4).
(5) Remove three torsion springs (5) from dump body (4).
15-145
