TM 9-2320-366-34-3
15-10. M1090/M1094 DUMP BODY REPLACEMENT (CONT)
(4) Install two pins (3) in dump body (2).
(5) Install two shims (4) on pins (3).
(6) Install two pin (5) in pins (3).
(7) Remove cargo sling and two dump body lifting brackets
(1) from rear of dump body (2).
(8) Manually raise dump body (2).
(9) Raise maintenance legs (6).
(10) Lower dump body (2) on maintenance legs (6).
(11) Lower two dump body legs (7).
NOTE
Performance of step (12) will raise subframe
assembly.
(12) Raise dump body until subframe assembly (8) is aligned
with dump body legs (7) (TM 9-2320-366-10-1).
(13) Shut down engine (TM 9-2320-366-10-1).
15-142
