TM 9-2320-366-34-3
15-8. M1090 REAR FENDER MOUNTING BRACKET AND EXTENSION BRACKET
REPLACEMENT (CONT)
b. Installation.
NOTE
• Left and right side rear fender mounting
brackets and extension brackets are installed
the same way. Left side shown.
• Steps (1) through (3) require the aid of an
assistant.
(1) Position rear fender mounting bracket (1) on frame rail
(2) with three bolts (3) and self-locking nuts (4).
(2) Position extension bracket (5) on rear fender mounting
bracket (1) with two bolts (6) and self-locking nuts (7).
(3) Tighten three self-locking nuts (4) and two self-locking
nuts (7) to 149-183 lb-ft (202-248 N·m).
c. Follow-On Maintenance.
(1) Install rear fender (TM 9-2320-366-20-4).
(2) Lower dump body (TM 9-2320-366-10-1).
End of Task.
15-124
