TM 9-2320-366-34-4
WARNING
Pintle
hook
extension
weighs
approximately 90 lbs (41 kgs). Attach a
suitable lifting device prior to installation.
Failure to comply may result in injury to
personnel or damage to equipment.
NOTE
• Step (51) requires the aid of two assistants.
• Use bolts P/N 12414307-142 and self-locking
nuts P/N 12414308-025 on step (51).
(51) Position pintle hook extension (58) on rear crossmember
(5) with four bolts (77) and self-locking nuts (78).
NOTE
• Use bolts P/N 12414307-143 and self-locking
nuts P/N 12414308-025 on step (52).
• Steps (52) through (57) require the aid of an
assistant.
(52) Position two bolts (59) and self-locking nuts (60) in pintle
hook extension (58).
(53) Tighten four self-locking nuts (78) and two self-locking
nuts (60) to 196-240 lb-ft (265-325 N·m).
Change 1
18-31
