TM 9-2320-366-34-4
NOTE
Use bolts P/N 12414307-140 and self-locking
nuts P/N 12414308-025 on step (32).
(32) Position rear lower crossmember support (62) on rear
crossmember (5) with two bolts (63) and self-locking nuts
(64).
NOTE
• Position two spacers on frame rails with beveled
edges facing down.
• Use
bolts
P/N
12414307-148
and
P/N
12414307-149 and self-locking nuts P/N
12414308-025 on steps (33 and 34).
• Left and right side of rear main crossmember
support is installed the same way. Right side
shown.
• Route connectors and terminal lugs under rear
main crossmember.
(33) Position two spacers (65) and rear main crossmember
support (66) on LH and RH frame rails (67 and 55) with
four bolts (68) and self-locking nuts (69).
(34) Position two bolts (70) and self-locking nuts (71) on rear
main crossmember support (66).
NOTE
Use bolts P/N 12414307-079 and self-locking
nuts P/N 12414308-021 on step (35).
(35) Position six bolts (72) and self-locking nuts (73) on rear
lower crossmember support (62).
Change 1
18-27
