TM 9-2320-366-34-4
(62) Connect connector J52 (31) to connector P52R (32).
NOTE
Left and right rear fenders are installed the
same way. Right side shown.
(63) Position bracket (48) on support bracket (49) with two
screws (47), washers (46), and self-locking nuts (45).
(64) Tighten two self-locking nuts (45) to 18-22 lb-ft (24-30
N·m).
(65) Position two resilient mounts (43) on rear fender (40)
with two screws (44), washers (42), and self-locking nuts
(41).
(66) Position washer (39) and hook (38) on rear fender (40)
with resilient mount (37), washer (36), and self-locking
nut (35).
(67) Tighten two self-locking nuts (41) and self-locking nut
(35) to 18-22 lb-ft (24-30 N·m).
(68) Perform steps (63) through (67) on left side rear fender.
b. Follow-On Maintenance.
Lower dump bed (TM 9-2320-366-10-1).
End of Task.
Change 1
18-33
