TM 9-2320-366-34-4
18-4. M1084/M1086 PINTLE HOOK EXTENSION KIT INITIAL INSTALLATION (CONT)
(9) Rotate clamp (15) 180 degrees.
(10) Install clamp (15) on cable assembly (17).
(11) Perform steps (6) through (10) on left side clamp.
NOTE
Left and right L-brackets are removed the
same way. Right side shown.
(12) Remove screw (18), self-locking nut (19), and L-bracket
(16) from rear crossmember (9).
NOTE
L-brackets are rotated 180 degrees and
positioned underneath the rear crossmember.
(13) Position L-bracket (16) on rear crossmember (9) with
screw (18) and self-locking nut (19).
(14) Perform steps (12) and (13) on left side L-bracket.
18-36
Change 1
