TM 9-2320-366-34-3
WARNING
Tow bar weighs approximately 150 lbs (68
kgs). Attach a suitable lifting device prior to
installation. Failure to comply may result in
injury to personnel or damage to equipment.
(8) Install tow bar (17) on tool box (18) with nut (19).
(9) Install bracket (20) on tool box (18) with nut (21).
c. Adjustment
(1) Hydraulic reservoir supply and return valves open (TM 9-
2320-366-10).
(2) Connect batteries (TM 9-2320-366-20-3).
(3) Start engine (TM 9-2320-366-10-1).
(4) Engage PTO (TM 9-2320-366-10-1).
NOTE
Steps (5) through (8) require the aid of an
assistant.
(5) Unfold underlift (1) (TM 9-2320-366-10-1).
NOTE
Underlift should fold in 6-8 seconds.
(6) Record time for underlift (1) to fold.
NOTE
Loosen set screw and turn flowmeter valve
left to decrease speed and right to increase
speed.
(7) Adjust lower flowmeter valve (2), as required.
(8) Repeat Steps (5) through (7), as required.
(9) Tighten setscrew (3)
16-485