TM 9-2320-366-34-3
(6) Disconnect hydraulic hose (17) from flowmeter valve
assembly (18).
(7) Remove flowmeter valve assembly (18) from hydraulic
tube (19).
(8) Remove adapters (20 and 21) from flowmeter valve
assembly (18).
b. Installation.
WARNING
Adhesives,
solvents,
and
sealing
compounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. Keep away from open fire
and use in a well-ventilated area.
If
adhesive, solvent, or sealing compound
gets
on
skin
or
clothing,
wash
immediately with soap and water. Failure
to comply may result in injury to
personnel.
(1) Apply sealing compound to threads of adapters (1 and
2).
(2) Install adapters (1 and 2) on flowmeter valve assembly
(3).
(3) Connect flowmeter valve assembly (3) to hydraulic tube
(4).
(4) Connect hydraulic hose (5) to flowmeter valve assembly
(3).
16-483