TM 9-2320-366-34-3
NOTE
Match mark wear plate and bearing housing
prior to disassembly.
(27) Remove wear plate (28) from bearing housing (1).
(28) Remove seal (33) from wear plate (28). Discard seal.
(29) Remove preformed packing (34) from bearing housing
(1). Discard preformed packing.
(30) Remove key (35) from shaft and bearing assembly (36).
NOTE
It may be necessary to wrap bearing housing
with a clean rag and tap with a soft face
hammer to loosen.
(31) Remove shaft and bearing assembly (36) from bearing
housing (1).
CAUTION
Use caution when removing seals. Failure to
comply may result in damage to bearing
housing.
(32) Remove seal (37) and backup ring (38) from bearing
housing (1). Discard seal and backup ring.
(33) Remove seal (39) from bearing housing (1). Discard
seal.
16-381
