TM 9-2320-366-34-3
b. Disassembly.
CAUTION
30K winch drive motor assembly must be
clamped in vise by mounting flange. Failure
to comply may result in damage to 30K winch
drive motor assembly.
NOTE
Match mark valve housing and bearing
housing prior to disassembly.
(1) Position mounting flange of bearing housing (1) in soft-
jawed vise.
NOTE
Match mark valve housing and valve plate
prior to disassembly.
(2) Remove four screws (2) from valve housing (3).
CAUTION
30K winch drive motor is made up of several
sections. Ensure that no other section sticks
to valve housing when removing. Failure to
comply may result in damage to equipment.
(3) Remove valve housing (3) from valve plate (4).
16-377
